USED BY THE TOP LURE PAINTERS AROUND THE WORLD

MIDCOAT CLEAR 100% NECESSARY FOR BEST RESULTS UVLS 4050 IS THE PRIME CHOICE

Lurecoat by Lurebuild 1:1 Epoxy 8oz Harder + 8oz epoxy makes 1 pint 16oz Hardner +16oz epoxy makes 1 quart. Finally we are here a professional grade coating with uv protection and flex additive ,designed for lure making and rod making. We want the best and so do you! Troubleshooting Most common issue- fish eye is typically caused 1 of 2 reasons 1.Chemical reaction to reducer or cleaner Solution we recommend sticking with createx brands for reducer and cleaner our homemade cleaner formula is 1/3 blue automotive windshield washer fluid ( amonia free)1/3 alcohol or witchhazel and 1/3 water. 2.Applying too thin or too thick a coat. Hanging method to cure seems to work well with a very light coat if you are using a turner to cure you may be able to apply a slightly thicker coat. If your lure is still tacky after 24hrs it's typically caused 1 of 2 reasons. 1. Incorrect ratio may need more harder try weighing and measuring. 2. Did not mix long enough 3-5min is the recommend amount of time, you will see the epoxy turn cloudy for about a minute and you will see air bubbles these do not transition to the lures finish in addition air bubbles and brush strokes should disapate within 3 minutes.